WriteLog
[Top] [All Lists]

[WriteLog] Changing Screen Configurations

To: <writelog@contesting.com>
Subject: [WriteLog] Changing Screen Configurations
From: w5xd@writelog.com (W. Wright, W5XD)
Date: Fri, 25 May 2001 12:49:11 -0000
Yes, I think you can accomplish what you want--different screen
layouts for each position in the network. If you follow the
network setup instructions in WL's help file, all the positions
in the network begin with identical screen layouts. The 
instructions call for preparing a single empty .WL file beforehand
and copy it to all the networked PC's before bringing up
the network-this is still highly recommended! But if
you later change the layout on one PC, WL does not exchange
the screen layout over the network, so that PC will keep
that layout. 

When you do a File Save, WL saves its current screen layout
in the .WL file, and restores it on File Open (with one
exception). Even though the log is repeated across
the network, it is still important that each position do
a File Save regularly, and not just because of the 
screen layout--changes to CW memories since the
last File Save will be lost, for example. Restarting a PC 
will restore the saved layout from the .WL file at File 
Open time.

Another way to maintain different screen layouts at
each position is to take advantage of the fact that WL also
saves its screen layout in its .INI file when you do a 
Setup Save Configuration. When WL first comes up, that's
the layout it uses. When you do a File Open, if you also
hold down the CTRL key, WL does NOT read screen layout
from the .WL file, so the .INI layout "wins". This CTRL
features is also useful if you open someone else's .WL
file--especially if they were running a larger monitor
than you are.

Wayne


> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Gordon Fogg
> Sent: Friday, May 25, 2001 05:03
> To: writelog@contesting.com
> Subject: [WriteLog] Changing Screen Configurations
> 
> 
> 
> Greetings all.  I have a question on saving and recalling 
> different screen
> set-ups for different operators in a multi-multi environment.  Is it
> possible to store individual operators' screen/window set-ups and then
> recall them at will from any one of six networked computers?  
> Say our 10
> meter op can't stand the 160 op's window set-up, but must 
> operate the 160
> station at some point.  Can he recall his own preferences 
> without manually
> rearranging the windows?  And return to the original settings 
> before the 160
> op finds out?  Thanks in advance for any ideas.
> 
> BTW, we plan to put WriteLog to the test in CQ WW SSB at VP2E 
> Multi-Multi.
> 7 Networked computers (one as a dedicated server and Telnet) 
> and 160-10
> stations.
> 
> Gordon N5AU
> VP2E crew member
> n5au@flash.net
> 
> 
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
> 
> 

--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>