Phil,
We will be a small 4 person 1A operation this year and will use WL on CW and
SSB. We will also have a second computer running on a network, as a backup,
to get us experienced with any RFI etc as we grow towards setting up a
second station etc.
Many of us started computer logging with CT so use F1 as the "CQ key"
Our setup will be:
F1: CQ FD de K1EO K1EO (listed as F11 in WriteLog)
F2: %D %BQSO B4%B1A EMA
F3: TU QRZ K1EO
F4: K1EO
F5: %C
F6: ?
F7: 1A EMA
F8: 1A
F9: EMA
If we are running, a typical sequence when someone answers our CQ: F2,
record the exchange, F3, then enter the log info.
Search & pounce: F4, receive/record the exchange, then enter the log info.
The keys are labeled above the F keys with cut out post it note labels. A
similar format is used to record info for the SSB DVK function for each
operator using their callsign. (the word "again?" is used for the ? F6
message in SSB)
We always have new operators so simple is best. Many just use F1 for CQ and
manually send or say the other stuff :-)
73 and GL, George .. W1ZT
----- Original Message -----
From: <PTSMANTUA@aol.com>
To: <writelog@contesting.com>
Sent: Friday, June 22, 2001 5:26 PM
Subject: [WriteLog] F Key set up - What will U use?
>
> Just curious, especially if a few of the big guns would share their F key
> set-ups.
>
> We (K8CAV and I, KF8JW) will operate 2B from Hiram Ohio, using WL.
>
> I will be tring DVK for he first time...
>
> TNX in advance
>
> de Phil
>
> KF8JW
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|