WriteLog puts the 2-radio A/B signal on the same LPT port as
for the DVK signal. And when the W9XT card is the DVK, there
is no A/B output from WL at all.
Clearly this is something I should look into. The only
suggestion I have for getting an A/B output in current
versions of WL is to not use the W9XT card and use a
sound board instead.
Wayne
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of TOMK5RC@aol.com
> Sent: Tuesday, June 26, 2001 23:52
> To: writelog@contesting.com
> Cc: GeorgeK5KG@aol.com
> Subject: [WriteLog] Two-radio switching problems
>
>
>
> First, if this message makes it to the reflector, it will be
> after a month of trying to figure out how to send plain text
> mail over AOL (version 6 is HTML). If you are reading this
> and you are an AOL subscriber, it was sent from the AOL web
> site, not the usual AOL screens. Thisis the only solution AOL
> tech support had for this problem.
>
> I have been using NA for years and just went "Windows." I
> have two FT1000MP's and a home-brew audio and keyer switching
> system built from the NA manual. I have that switchbox hooked
> to LPT1 and a W9XT voice keyer in LPT 2. There does not seem
> to be any such option in the menu of Writelog. Any suggestions?
>
> Tom, K5RC
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|