WriteLog
[Top] [All Lists]

[WriteLog] Radio Control

To: <writelog@contesting.com>
Subject: [WriteLog] Radio Control
From: w4gkm@juno.com (w4gkm@juno.com)
Date: Sun, 2 Sep 2001 13:58:25 -0500
I seemed to have developed some sort of problem with my comports.  Up
until installing the last update, I think 10.27G both of my radios were
working fine with comport radio control.  However now with 10.27G I
noticed that the number two(2) radio was not showing a frequency in the
box which was on comport four(4).  I then tried disconnecting the number
one(1) radio which was on comport three(3) and then connecting radio
two(2) to comport three(3) and it worked.  So I deducted that it must be
in that comport and I then connected the number two(2) radio to the
number two(2) comport and everything worked fine.

Then I tried the other comports five(5) thru ten(10) and it would not
work on any of them.  Again I see that it is not going to work on any
comport above three(3).  Does anyone have some sort of idea as to what is
going on and how to fix it????

I would leave the number two(2) radio on comport two(2) but I need that
comport for the HAL ST-8000 because it will only work on comports one(1)
or two(2).  I have the mouse on one(1) so having ten(10) comports doesn't
seem to be of much help to me.

The additional comports three(3) thru ten(10) are the "Rocketport VESA 8
port" model.  Any help will be greatly appreciated.   Oh yes, I tried the
"Comslot" substitute but that didn't work either.

Nick 
W4GKM
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] Radio Control, w4gkm@juno.com <=