--=====================_58128314==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed
If I select the Freq/Mode box in the lower left it brings up a window that
lets me set frequency and mode. There is also a window within that box
"Select Frequency"
It starts with 1800 and if I change it the 1800 stays and the new is not
added. Should it be. What controls the frequency I can select there. I know
I can enter any manually but how do I get the lsit built?
In CW decode there is no received speed display. Does that only work with
the external keyer. The box is gray in the cw decoder setup. Maybe that is
a future enhancement?
I was wrong about not running other than 4800. I did get it to run 19200.
Better but would like at least 38400 and better 57600.
Gil Baron http://members.home.com/gbaron
44:04.925 N 92:30.758 W 1055'
"Baila como nadie te ve"
--=====================_58128314==_.ALT
Content-Type: text/html; charset="us-ascii"
<html>
If I select the Freq/Mode box in the lower left it brings up a window
that lets me set frequency and mode. There is also a window within that
box "Select Frequency"<br>
It starts with 1800 and if I change it the 1800 stays and the new is not
added. Should it be. What controls the frequency I can select there. I
know I can enter any manually but how do I get the lsit built?<br><br>
In CW decode there is no received speed display. Does that only work with
the external keyer. The box is gray in the cw decoder setup. Maybe that
is a future enhancement?<br><br>
I was wrong about not running other than 4800. I did get it to run 19200.
Better but would like at least 38400 and better 57600.<br><br>
<br>
<x-sigsep><p></x-sigsep>
<font face="Courier New, Courier">Gil Baron
<a href="http://members.home.com/gbaron";
eudora="autourl">http://members.home.com/gbaron</a><br>
44:04.925 N 92:30.758 W 1055'<br>
"Baila como nadie te ve" <br>
</font></html>
--=====================_58128314==_.ALT--
|