WriteLog
[Top] [All Lists]

[WriteLog] 10.28D not ready to download...

To: <writelog@contesting.com>
Subject: [WriteLog] 10.28D not ready to download...
From: SteveBaron@starlinx.com (Steve Baron - KB3MM)
Date: Sat, 6 Oct 2001 22:57:49 -0000
Yes - Oceania is there.

----- Original Message -----
From: "Ron K5DJ" <k5dj@writelog.com>
To: "Steve Baron - KB3MM" <SteveBaron@starlinx.com>
Cc: <writelog@contesting.com>; <edlyn@california.com>
Sent: October 06, 2001 22:19
Subject: RE: [WriteLog] 10.28D not ready to download...


> We didn't change it that why it says 10.28C.
> It's was over looked or a so called mistake,
> if you downloaded from the address I posted for
> 10.28D you have 10.28D. We will correct this
> asap.. One other thing to check, see if you
> have Oceania DX contest on the list of supported
> contests. If you do ALL IS WELL..
>
>  73, de Ron K5DJ
> ==============================
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Steve Baron - KB3MM
> Sent: Saturday, October 06, 2001 20:44
> To: k5dj@writelog.com; writelog@contesting.com
> Subject: Re: [WriteLog] 10.28D not ready to download...
>
>
> If this is 28D, why does Help|About say 28 C ?
>
> ----- Original Message -----
> From: "Ron K5DJ" <k5dj@writelog.com>
> To: <writelog@contesting.com>
> Sent: October 06, 2001 19:02
> Subject: [WriteLog] 10.28D not ready to download...
>
>
> > Hi All, here is update 10.28D.
> >
> > In update 10.28D:
> >
> > General DXCC Logger auto-fills Name column.
> > IOTA contest accepts less than 3 digit numbers.
> > IOTA contest exports ADIF with a dash.
> > Support for Oceania DX contest.
> > Supercheck sorts calls in the log first, then calls from the .dta file.
> > Fix bug with %C in programmed message: would not send anything beyond
the
> > CALL if it was a dupe.
> > Support VHF transverter with high-side mixer.
> > Fix bug in assignment of sequence numbers on band change when doing
> by-band
> > numbering.
> > Make ADIF import preserve NETW station letter.
> > Add Network Disconnect menu item.
> > Fix incorrect "No Rig!" display when running CW but no rig on a COM
port.
> > WAE QTC TX dialog advances on down arrow.
> > Multi-Single 10 minute rule go/no-go display - (is only in CQWW phone
and
> > CW--not RTTY.
> > WAE QTC RX dialog has no ALT+A accelerator key anymore.
> >
> >         http://www.writelog.com/Downloads/WL1028DUPG.ZIP
> >
> >   73, de Ron K5DJ
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
> >
> >
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>


<Prev in Thread] Current Thread [Next in Thread>