Tom,
I solved the problem ..sort of , I am not fully sure how but I got it
working again but I did.
What I noticed on my machine was that I had a few differing versions of
MMTTY on my computer, mostly from the days of testing it out and helping
write the MMTTY help files. . They were in different directories. I
deleted all but version 1.62. I am not sure that the different versions
were causing the problem but I mention it here just in case it was a factor.
I ran Writelog and opened RTTYRITE , Writelog was unable to open
MMTTY-Plug-in because I had deleted it from the path I originally installed.
That brought up the plug-in dialog box that asked me which path I wanted to
use , I pointed it to my Zakanaka directory where the latest version of
MMTTY resided.
The MMTTY plugin successfully loaded. However I did get an error (see
below) but the program loaded anyway. The error is DLL related. Writelog
and MMTTY seem to perform as they should EXCEPT that the MMTTY plug-in does
not exit when I close Writelog (it is supposed to) I have to close MMTTY
from the task. If that is all that is a problem I can live with it.
So I would suggest you save a copy of MMTTY to a temp directory, delete
MMTTY from where you have it now, boot up Writelog and, when asked, point
it to the MMTTY.EXE in your temp directory and see what happens.
I am not sure what the divide by zero error fix is , will check the
archives.
RTTYRITE9 caused a divide error in module MMTTYTNC.DLL at 017f:10006135.
Registers:
EAX=00000280 CS=017f EIP=10006135 EFLGS=00010206
EBX=00000280 SS=0187 ESP=0056f99c EBP=0056f9d8
ECX=00000000 DS=0187 ESI=012b0160 FS=594f
EDX=00000000 ES=0187 EDI=00000012 GS=0000
Bytes at CS:EIP:
f7 f9 8b d1 0f af d0 2b da 89 45 f8 2b 5d e0 89
Stack dump:
00000012 012b0160 bfc05836 011a5650 0056fb6c 10007a1d 011a0000 00000000
00000000 00000280 00000012 011a5654 100120d1 011a5654 100121c4 0056fb6c
Andy KB2EOQ
----- Original Message -----
From: "Andrew J. O'Brien" <obrienaj@netsync.net>
To: "Tom Horton" <k5iid@ntelos.net>
Cc: <mth@yahoogroups.com>
Sent: Wednesday, October 24, 2001 22:52
Subject: Writelog/MMTTY problems
> Have not done much on it today. I notice that the MMTTY logo comes up on
my
> task bar even though I do not get the MMTTY screen. I was on the
> MMTTY/Zakanaka help team and recall this happening (the task bar showing
> up but no program) before, I am trying to remember what the reason was. I
> suspect it is the plug in but I may email Mako JE3HHT and the team to see
if
> they have any idea
>
>
> ----- Original Message -----
> From: "Tom Horton" <k5iid@ntelos.net>
> To: "Andrew J. O'Brien" <obrienaj@netsync.net>
> Sent: Wednesday, October 24, 2001 9:02
> Subject: Re: [WriteLog] Writelog/MMTTY problems
>
>
> > Nope, never did!
> >
> >
> >
> > At 23:05 10/23/01 -0400, you wrote:
> > >I suspect the plug-in program has a bug. Did yours ever work??
> > >
> > >----- Original Message -----
> > >From: "Tom Horton" <k5iid@ntelos.net>
> > >To: "Andrew J. O'Brien" <obrienaj@netsync.net>
> > >Sent: Tuesday, October 23, 2001 23:02
> > >Subject: Re: [WriteLog] Writelog/MMTTY problems
> > >
> > >
> > > > Andy,
> > > > Well, go ahead and try reinstalling WL, but it didn't help me any!
> > > > I don't know what is happening!
> > > > 73, Tom
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > At 22:45 10/23/01 -0400, you wrote:
> > > > >Tom,
> > > > >
> > > > >I uninstalled and re-installed the plug-in but still no solution,
> nothing
> > > > >about this in Don's trouble shooting section. I was thinking about
> > > > >uninstalling Wrietlog and then trying again. MMTTY as a stand
alone
> > >works
> > > > >fine.
> > > > >
> > > > >Andy KB2EOQ
> > > > >
> > > > >----- Original Message -----
> > > > >From: "Tom Horton" <k5iid@ntelos.net>
> > > > >To: "Andrew J. O'Brien" <obrienaj@netsync.net>
> > > > >Sent: Tuesday, October 23, 2001 22:34
> > > > >Subject: Re: [WriteLog] Writelog/MMTTY problems
> > > > >
> > > > >
> > > > > > Andy,
> > > > > > I posed this same question a while back and got no takers.
> > > > > > If you find out anything would you be so kind as to forward it
to
> me.
> > > > > > Thanks,
> > > > > > Tom K5II
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > At 20:02 10/23/01 -0400, you wrote:
> > > > > > >Interesting, immediately after the JARTS contest I closed
> Writelog.
> > >A
> > > > >hour
> > > > > > >later I opened it to work on the log and noticed that MMTTY's
> plug in
> > > > >would
> > > > > > >not work. Under RTTYRITE I get "initializing MMTTY please
wait:
> and
> > >it
> > > > > > >never goes away. I have tried each day to see if it magically
> fixed
> > >it's
> > > > > > >self but no luck. Odd, it worked perfectly before and I have
> changed
> > > > > > >nothing that I can tell. Off to Don's trouble shooting page to
> see
> > >if
> > > > >this
> > > > > > >is covered.
> > > > > > >
> > > > > > >I would have been mega pissed (angry to you Brits...not drunk)
if
> > >this
> > > > >had
> > > > > > >happened mid-contest!
> > > > > > >
> > > > > > >
> > > > > > >Andy KB2EOQ
> > > > > > >
> > > > > > >
> > > > > > >_______________________________________________
> > > > > > >WriteLog mailing list
> > > > > > >WriteLog@contesting.com
> > > > > > >http://lists.contesting.com/mailman/listinfo/writelog
> > > > > >
> > > >
> >
>
|