Thanks much for the quick confirmation Joe. To monitor the transmitted
soundcard audio, I evidently need to break out a separate PTT line on the
FT-1000D, unlike the FT-1000MP.
Tnx/73,
Barry N1EU
>From: "Joe Subich, K4IK" <w8ik@subich.com>
>To: "Barry N1EU" <n1eu@hotmail.com>
>Subject: RE: [WriteLog] FT1000D, PTT & Soundcard Audio
To: <writelog@contesting.com>
>Date: Thu, 25 Oct 2001 23:52:12 -0400
>
>
>Yes, the serial (CAT command) PTT does not allow the monitor to
>work. I prefer to use "all mode PTT on the CW Port RTS" with
>a 4N33. It drives the PTT line on the PKT port (which I use as
>the AFSK input) and provides PTT in all modes.
>
> > It seems that when WriteLog is keying my FT-1000D PTT via the
> > serial port,
> > the soundcard audio is transmitted fine but it doesn't come through the
> > headphone monitor. I'd appreciate any comments from other FT-1000D/WL
> > users. Do you see the same thing? If I use VOX or step on my
> > footswitch,
> > the audio comes through the monitor circuit.
> >
> > Tnx/73,
> > Barry N1EU
> >
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
|