If you are on Win95 you can edit the registry to show the additional ports
as COM3 thru COM6.
73 Jamie WW3S
----- Original Message -----
From: "Wink" <wink@rochester.rr.com>
To: <k4rv@mindspring.com>; "WriteLog Reflector" <writelog@contesting.com>
Sent: Wednesday, November 21, 2001 1:48 PM
Subject: [WriteLog] SIIG 4 Port PCI Card
> I've been using the SIIG PCI card in my Pentium 166 Mhz for a couple
> years with no problems. The com ports are not consecutive numbers, by
that
> I mean the computer ports are Com1 and Com2 and the SIIG ports are Com5
thru
> Com8. That doesn't present any problem, you just assign the right number
to
> whatever you have connected to that port and what you want it to do. By
the
> way, I am running FSK from com7 off the SIIG card without any problem. I
> have the soundcard mic jack connected to the IC746 phone jack and the
> soundcard speaker jack to Acc1 of the radio with a simple rs232 converter
in
> between. It works great!
>
> Gary / N2UM
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|