WriteLog
[Top] [All Lists]

[WriteLog] Serial Ports AGAIN!

To: <writelog@contesting.com>
Subject: [WriteLog] Serial Ports AGAIN!
From: af4z@palmnet.net (Don Winn)
Date: Thu, 03 Jan 2002 20:56:37 -0500
Jim,

You may be having  a problem with the UART on the serial card working with 
5 bit Baudot codes.  I believe the ST-8000  uses the Dumb Terminal 
selection in Writelog.  Many of the newer PCI and some ISA cards do not 
support 5 bits.

To verify it, set the ST-8000 up on com1 or 2 and rig on com 3.  It should 
work that way.  Most computer comports still support 5 bits.

I have been working with another Ham trying to get the PCI-400 Byterunner 
board to work in Dumb Terminal mode but no success.  The UART does support 
5 bits but the board does not .

73's
Don  AF4Z



At 08:03 AM 01/03/2002 -0800, you wrote:
>I have tried unsuccessfully to use an Equinox 4 port serial card with
>Writelog. (6 serial ports total). The program will just not recognize them.
>I know the ports are working because I can use them with ProComm + for
>Windows on the same machine.
>
>What's the deal with Writelog and the difficulty with serial ports ?
>
>All I need is 3 serial ports...1-Rig   2-TNC for packet    3-RTTY TU. (Hal
>ST-8000)
>
>Thanks and 73!
>Jim W7RY
>
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog


<Prev in Thread] Current Thread [Next in Thread>