This is a multi-part message in MIME format.
------=_NextPart_000_0011_01C1A074.62E65FC0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
You have the rigblaster configured properly. The way to make it work is =
to put the rigblaster in auto and put your microphone input to the =
soundcard mic input. If you use a heil headset this is easy. You will =
need to adjust the audio properties of the mic on your soundcard mixer =
to get the desired audio. With this set up, you will be able to play =
your recordings ala dvk and have vox. Your other alternative with the =
rigblaster is to put it on auto so that your dvk will work and then use =
a ptt switch. In my case it was a heil with a foot switch. Good luck =
and cu in the test
73s Tex in Texas (Marty)
----- Original Message -----=20
From: Ed Gilliland/W5TM=20
To: WriteLog@contesting.com=20
Sent: Friday, January 18, 2002 6:32 PM
Subject: [WriteLog] RigBlaster setup help
I have a RigBlaster interfaced to an FT-1000MP Mark-V. I want to use =
it in the NAQP SSB this weekend. I want to be able to set up the =
RigBlaster in AUTO and be able to key the radio with the software or =
with the radio's VOX. As it is now I have to switch the RigBlaster to =
VOX to key the radio with the radio's VOX or switch the RigBlaster to =
AUTO to key the radio with the PC. Is this a limitation of the =
RigBlaster or do I have the RigBlaster configured incorrectly? The PC =
keys the radio with the RigBlaster in AUTO but the radio doesn't see any =
audio from the sound card.
My set up.
WriteLog, CW PTT on LPT/COMM pin 16
FT-1000MP MARK-V
RigBlaster RS-232 cable to the PC
Heil headset plugged into the RigBlaster
RigBlaster mike cable plugged into the =
radio
stereo cable from the pc's sound card =
speaker out to the RigBlaster IN jack
Thanks for the help?
Ed/W5TM
_______________________________________________ WriteLog mailing list =
WriteLog@contesting.com =
http://lists.contesting.com/mailman/listinfo/writelog
------=_NextPart_000_0011_01C1A074.62E65FC0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2712.300" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>You have the rigblaster configured =
properly. =20
The way to make it work is to put the rigblaster in auto and put your =
microphone=20
input to the soundcard mic input. If you use a heil headset this =
is=20
easy. You will need to adjust the audio properties of the mic on =
your=20
soundcard mixer to get the desired audio. With this set up, you =
will be=20
able to play your recordings ala dvk and have vox. Your other =
alternative=20
with the rigblaster is to put it on auto so that your dvk will work and =
then use=20
a ptt switch. In my case it was a heil with a foot switch. =
Good luck=20
and cu in the test</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>73s Tex in Texas =
(Marty)</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3Dw5tm@earthlink.net href=3D"mailto:w5tm@earthlink.net";>Ed=20
Gilliland/W5TM</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3DWriteLog@contesting.com=20
href=3D"mailto:WriteLog@contesting.com";>WriteLog@contesting.com</A> =
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Friday, January 18, 2002 =
6:32=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [WriteLog] RigBlaster =
setup=20
help</DIV>
<DIV><BR></DIV>
<P>
<DIV></DIV>
<DIV>
<DIV><FONT face=3DFixedsys>I have a RigBlaster interfaced to an =
FT-1000MP=20
Mark-V. I want to use it in the NAQP SSB this weekend. I =
want to=20
be able to set up the RigBlaster in AUTO and be able to key the radio =
with the=20
software or with the radio's VOX. As it is now I have =
to switch the=20
RigBlaster to VOX to key the radio with the radio's VOX =
or=20
switch the RigBlaster to AUTO to key the radio with the PC. =
Is this=20
a limitation of the RigBlaster or do I have the RigBlaster configured=20
incorrectly? The PC keys the radio with the RigBlaster in AUTO =
but the=20
radio doesn't see any audio from the sound card.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DFixedsys>My set up.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DFixedsys>WriteLog, CW PTT on LPT/COMM pin =
16</FONT></DIV>
<DIV><FONT face=3DFixedsys>FT-1000MP MARK-V</FONT></DIV>
<DIV><FONT face=3DFixedsys>RigBlaster RS-232 =
cable to the=20
PC</FONT></DIV>
<DIV><FONT=20
=
face=3DFixedsys> &nb=
sp; Heil=20
headset plugged into the RigBlaster</FONT></DIV>
=
<DIV> &n=
bsp; &nb=
sp; <FONT=20
face=3DFixedsys>RigBlaster mike cable plugged into the =
radio</FONT></DIV>
=
<DIV> &n=
bsp; &nb=
sp; <FONT=20
face=3DFixedsys>stereo cable from the pc's sound card speaker out to =
the=20
RigBlaster IN jack</FONT></DIV>
<DIV><FONT face=3DFixedsys></FONT> </DIV>
<DIV><FONT face=3DFixedsys>Thanks for the help?</FONT></DIV>
<DIV><FONT face=3DFixedsys></FONT> </DIV>
<DIV><FONT face=3DFixedsys>Ed/W5TM</FONT></DIV></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<P></P>_______________________________________________ WriteLog =
mailing list=20
WriteLog@contesting.com=20
http://lists.contesting.com/mailman/listinfo/writelog</BLOCKQUOTE></BODY>=
</HTML>
------=_NextPart_000_0011_01C1A074.62E65FC0--
|