Floyd,
I can't answer your first question unless you are not using the
current update. There was a problem in sending reports with serial
numbers after the contact had been logged, but that has been fixed
in the latest version. Before, if you logged a contact, then the station
asks for a repeat and you hit your Exchange key, it would send the
serial number 000. But that has been fixed. In 1500 Q's, not once
did WriteLog send 000 for me this past weekend.
On the 2nd question - go to MMTTY setup in the Demodulator tab
and un-check AFC connection at the bottom right hand side. You
can turn AFC off in the AFC tab, but if you have AFC connection
checked on the demodulator tab, then AFC will eventually come on.
I don't know the correlation of the AFC connection, so I don't know
why this happens.
The best thing to do is use the Profiles and set up for S&P profiles
with no AFC and the AFC Connection un-checked. This way, AFC
never comes on when you are S&P.
73, Don AA5AU
----- Original Message -----
From: "Floyd Sense" <sentek@sprintmail.com>
To: <writelog@contesting.com>
Sent: Friday, February 08, 2002 7:24 PM
Subject: [WriteLog] Two questions on Writelog & MMTTY
> I was chasing a few new ones this evening in the contest, having not
> used Writelog and MMTTY together in a contest before. Two rather odd
> things happen repeatedly:
>
> 1. Every now and then, Writelog sends my sequence number as 000 when I
> send it from a buffer with a specification of %3 for the sequence
> number.
>
> 2. MMTTY, apparently at random, decides I really want the AFC button
> pushed and turns it on. I have it disabled everywhere it's obvious, but
> I must be missing something. Seems to me I had this problem with MMTTY
> outside of Writelog a while back, but don't recall what the solution
> was.
>
> I'm running Writelog 10.27G.
>
> --
> K8AC
> Floyd Sense - Angier, NC
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|