WriteLog
[Top] [All Lists]

[WriteLog] MMTTY calibration with screenshots

To: <writelog@contesting.com>
Subject: [WriteLog] MMTTY calibration with screenshots
From: jflanders2@home.com (Jerry Flanders)
Date: Sat, 16 Feb 2002 11:18:20 -0500
John, I think you should drop back to a simple one radio, one soundcard 
configuration with writelog+MMTTY+PLUGIN and get it working. then 
substitute the second radio into this same setup, noting any special 
settings required at each stage. Then go with the two simultaneous radios 
and make sure all settings are correct. Make sure AFC is off on MMTTY, or 
this will add confusion.

Don't forget that you can move the MMTTY passband over to where the audio 
is with the MMTTY control, or move the radio's passband over to where MMTTY 
wants it with the radio's passband control. Check the MMTTY control 
carefully. I forget what it is called, but it lets you move the passband 
around.

Good Luck

Jerry W4UK

At 08:31 AM 2/16/2002 -0500, WA9ALS - John wrote:
>This didn't fix my problem, but it's interesting nevertheless.  These will
>be posted sometime this weekend on the web for future reference.
>
><SNIP>
>Any elucidating comments and commiserations are welcome!  Before offering
>suggestions though, please remember that this doesn't have anything to do
>with how the radios are set.  Either of my radios, when played through the
>Soundblaster, work fine with the signal in the passband where it should be.
>However, EITHER of the radios, using any filter, have the signal outside the
>MMTTY range when played through the Integrated sound.  73 - John (WA9ALS)
>
>
>_


<Prev in Thread] Current Thread [Next in Thread>