I am still having problems using the MFJ sound card to rig interface when
using WL. I can get the voice keyer message to play ( PTT & transmit) just
fine. The problem is that the only way to stop the voice keyer is to push
the escape key. Pushing the PTT on the mic doesn't work. I do not want to
rewire the mic or use VOX ( high sound environment) Does anyone know what
pin on the serial port WL is looking at to stop the voice keyer, and is it
looking for a high or low? I may have to rewire the MFJ box to fit my needs
and that is OK. The rig here is an ICOM IC-736. Also plan to make another
setup for the IC-275H.
BTW if you are not familiar with the MFJ 1275 you can look at the manual on
line with schematic by going to www.mfjenterprises.com
Thanks for any and all help
Carl
Semper Fi (former active duty Jar-head)
Cpl USMC 1966 - 1972 RVN 6/67 - 7/69
"For those who fought for it, freedom has
a flavor the protected will never know"
Unknown Marine, Khe Sahn, Viet Nam
73 De W2SGX .-- ..--- ... --. -..- FN12um
|