In a message dated 6/16/2002 3:24:29 AM Greenwich Standard Time, Georgek5kg
writes:
>
> >> One thing to check is the under the Band menu, under Set Freq and Mode
>> and
>> make sure that the proper comm port is selected for the proper radio. If
>> memoery serves me correctly, you have to have the radio selected as active
>> and then set the comm port. This is a different place than as in the set
>> up
>> menu.
>>
>
> Chuck,
>
> You hit the nail on the head. My settings under the Band menu for
> assigning each radio to the proper comm port had somehow changed. Once
> changed back, I was in business.
>
> I recall being snake bit by this before. Just setting the radio to a comm
> port in the SETUP I PORTS menu is not enough. They must also be set
> correctly in the BANDS I SET FREQUENCY AND MODES menu as well.
>
> Who knows how many hours of investigation this one has cost me!
>
> Thanks again Chuck.
>
>
George I. Wagner, K5KG
Productivity Resources LLC
941-312-9450
941-312-9460 fax
201-415-6044 cell
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|