WriteLog
[Top] [All Lists]

[WriteLog] FT1000MP MkV & FSK

To: <writelog@contesting.com>
Subject: [WriteLog] FT1000MP MkV & FSK
From: jimsmith@shaw.ca (Jim Smith)
Date: Tue, 09 Jul 2002 19:04:34 -0700
Hi Don,

My MkV Manual on page 17 shows the 4-pin RTTY Jack.  Nothing is labelled 
SHIFT.
Pin 1 goes to TNC FSK OUT
Pin 2 goes to TNC AF IN
Pin 3 is PTT
Pin 4 is GND

Hope this helps

73 de Jim Smith    VE7FO


Don Hill AA5AU wrote:

>Trying to help someone having problems running the Mark V on FSK.
>I downloaded the manual and wondering if on the 4 pin RTTY plug if
>"SHIFT" is the FSK input.  If so, should you be able to short and open
>"SHIFT" to ground to see your signal shift from Mark to Space or vice versa?
>
>This looks cut and dried, but the fella is telling me the carrier does not
>shift in frequency.  Is there something he's not setting?
>
>Any confirmation or other information concerning running FSK with the
>Mark V is appreciated.
>
>73, Don AA5AU
>See "Getting Started on RTTY" at www.aa5au.com/rtty
>& AA5AU WriteLog Website http://www.geocities.com/writelog
>
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>



<Prev in Thread] Current Thread [Next in Thread>