> I remember using the 940 with my PK-232 years ago on fsk and don't
> remember any problem, but I know that the 940 isn't exactly smart
> when it comes to FSK.
The PK-232 has 2 FSK outputs - FSK and FSKR - One or the other gets you the
"right" polarity. Which is "right" depends on your specific rig. This is
explained in the PK-232 manual.
Newer rigs have menu items that let you choose FSK or FSK Rev - Again, which
is "right" depends on which rig you have. You just try it - Hopefully you
can tell by listening with a monitor when you have it correct. Otherwise
someone can listen for you on the air.
If you have a homebrew transistor interface, you can reverse the polarity by
changing how you wire the transistor. I would hope that the RigBlaster has
a switch or jumper or otherwise a way to change FSK keying polarity.
If you need someone to listen for your signal on the air, just holler!
|