WriteLog
[Top] [All Lists]

[WriteLog] (no subject)

To: <writelog@contesting.com>
Subject: [WriteLog] (no subject)
From: matwood@sover.net (Matt Atwood)
Date: Sun, 28 Jul 2002 07:41:22 -0400
I have an issue with WL 10.28C CW Keying on a Com Port.  It seems that as
soon as I save my Ports settings indicating that Com1 is CW and Com2 is Rig
Ctrl, the CW port is active and my rig begins to key continuously.  I have
tried changing virtually every setting I can think of, but to no avail.  I
know that the hardware setup works because the same setup works fine with my
everyday QSO logger.  I went through the Reflector archives, but nothing I
saw seemed related.  Any help would be appreciated.

Thanks,

Matt, N1RJF


<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] (no subject), Matt Atwood <=