WriteLog
[Top] [All Lists]

[WriteLog] CW Keyer - PC generates

To: <writelog@contesting.com>
Subject: [WriteLog] CW Keyer - PC generates
From: steve@slrs.com (Steve Russell)
Date: Fri, 11 Oct 2002 21:38:47 -0400
Hi Randy,

Yes, DXBase sends cw fine.  COM1 is interrupt 4, COM3 is USB using interrupt
9.

-Steve, AA3ZV

----- Original Message -----
From: "Randy Thompson, K5ZD" <k5zd@charter.net>
To: "Steve Russell" <steve@slrs.com>; <writelog@contesting.com>
Sent: Friday, October 11, 2002 6:58 PM
Subject: RE: [WriteLog] CW Keyer - PC generates


> But is DXBase sending CW?
>
> Make sure that COM1 and COM3 are not sharing interrupts.
>
> Randy, K5ZD
>
> > -----Original Message-----
> > From: writelog-admin@contesting.com
> > [mailto:writelog-admin@contesting.com]On Behalf Of Steve Russell
> > Sent: Friday, October 11, 2002 21:44 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] CW Keyer - PC generates
> >
> >
> > As soon as I select 'PC generates' for my CW generation, the
> > interface to my rig dies.
> >
> > I'm using COM3 as rig interface, COM1 as CW (DTR) interface.  Rig
> > is IC-746pro (using 756pro selection).
> >
> > DXBase survives this setup, so I don't think it is a com port problem.
> >
> > Any ideas?
> >
> > Thanks!
> >
> > -Steve
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > ---
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>


<Prev in Thread] Current Thread [Next in Thread>