Yes, this was discussed in May 2002 look in the archives for more info on
this subject. Put the ini setting from my e-mail below to change the
writelog address to match the rig default.
73,
Zev Darack
Read below:
-----Original Message-----
From: Darack, Zev [mailto:Zev.Darack@banklink.com]
Sent: Wednesday, May 22, 2002 12:37 PM
To: 'William Hein, AA6TT'; Writelog Reflector (E-mail)
Subject: RE: [WriteLog] IC-756PRO-II support
I figured out how to do it. Add this entry to the rigs section of the INI
without changing the rig and you will be able to control the 756pro II using
the 756 pro entry (thanks WA9ALS for the website/info):
[RIGS]
Icom IC-756PRO=0x64
Here are the baud rates and other parameters assumed by the WriteLog rig
drivers:
rig baud
rate
Icom
Address
Kenwood 4800
Yaesu 4800
Ten Tec Omni V 1200
Ten Tec Omni VI 1200 0x04
Ten Tec Delta II 1200 0x02
Icom 271 1200 0x20
Icom 275 1200 0x10
Icom 375 1200 0x12
Icom 471 1200 0x22
Icom 475 1200 0x14
Icom 575 1200 0x16
Icom 706 1200 0x48
Icom 725 1200 0x28
Icom 735 1200 0x04
Icom 736 1200 0x40
Icom 737 1200 0x3C
Icom 746 1200 0x56
Icom 751 1200 0x1C
Icom 756 1200 0x50
Icom 756 PRO 1200 0x5C
Icom 761 1200 0x1E
Icom 765 1200 0x2C
Icom 775 1200 0x46
Icom 781 1200 0x26
-----Original Message-----
From: Yrham@aol.com [mailto:Yrham@aol.com]
Sent: Tuesday, October 22, 2002 10:44 AM
To: writelog@contesting.com
Subject: [WriteLog] 756 PRO II Interface
I'm having difficulty with the radio and computer "talking".
I seemingly have tried all combos of ports, etc. Is it possible that the
address for the PRO II is different from the PRO and I need to modify the
INI
file?
Any help is appreciated............John
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
CONFIDENTIALITY NOTICE: This communication and any attachments are
confidential, and are only for the use of the intended recipient. If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited. If you have received this
communication in error, please contact the sender immediately and
delete the original message. Thank you.
|