I agree with Gil that the settings should be saved with the contest file. I
frequently use different configurations depending on the contest (usually
changes with Rtty, CW, SSB) and it would be nice to have all the settings
saved with the file. Also when you import from a file, ie. when bringing in
memory settings from the same contest last year, maybe you could also bring
in the prior settings. That might be more difficult however and I'm not
completely sure that would be the place for them.
My experience in the last few contests has also been that Writelog has
performed flawlessly. Kudos to Wayne and Ron for their fine work. They don't
get thanked enough here.
CU in the next one.
73, Don VE3BUC
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org]On Behalf Of Gil Baron
> Sent: Monday, November 25, 2002 3:28 PM
> To: n6kj; WriteLog@contesting.com
> Subject: RE: [WriteLog] Saving CW keying port configuration
> Do you do a Setup, Save Configuration after you change this? that is
> required. This is part of a larger problem that there are 2
> places that keep
> part of the configuration, the ini file and the contest file.
> I think that
> is a design flaw that should be fixed.
> I loose my Fonts and setup of the Cluster window ( follow
> transmitter, etc)
> even though I do save things but the ports do get saved
> correctly as do most
> things. In my opinion the entire state of the program should be saved
> automatically when you terminate. It should not be up to you
> to remember it
> and it shod be saved in the contest file or one pointed to by
> that file. It
> cannot be easily done because the ini file is kept in the
> windows folder
> which is also not correct design.
> On the other hand, once up and running the program performed
> flawlessly for
> > -----Original Message-----
> > From: email@example.com
> > [mailto:firstname.lastname@example.org]On Behalf Of n6kj
> > Sent: Monday, November 25, 2002 1:24 PM
> > To: WriteLog@contesting.com
> > Subject: [WriteLog] Saving CW keying port configuration
> > Can someone tell me why I can't seem to save the CW port
> > I am using COM1 for rig control and COM2 for CW keying. Every
> > time I start up
> > Writelog I have to go back into the port setup menu and
> configure COM2 to
> > be my CW keying port. Why isn't this being saved?
> > Kelly Johnson
> > N6KJ
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog mailing list