It appears you are using the wrong CI-V address. You can either change the
value in your rig to match one of the existiing WL defaults, or you can
modify the WRITELOG.INI file to change the CI-V address in WL to match your
rig.
Here is an example of how to change the INI file:
[RIGS]
Icom IC-756PRO=0x64
NOTE: the name must be exactly as it appears in the drop down box including
spaces
Here are the baud rates and other parameters assumed by the WriteLog rig
drivers:
rig baud
rate
Icom
Address
Kenwood 4800
Yaesu 4800
Ten Tec Omni V 1200
Ten Tec Omni VI 1200 0x04
Ten Tec Delta II 1200 0x02
Icom 271 1200 0x20
Icom 275 1200 0x10
Icom 375 1200 0x12
Icom 471 1200 0x22
Icom 475 1200 0x14
Icom 575 1200 0x16
Icom 706 1200 0x48
Icom 725 1200 0x28
Icom 735 1200 0x04
Icom 736 1200 0x40
Icom 737 1200 0x3C
Icom 746 1200 0x56
Icom 751 1200 0x1C
Icom 756 1200 0x50
Icom 756 PRO 1200 0x5C
Icom 761 1200 0x1E
Icom 765 1200 0x2C
Icom 775 1200 0x46
Icom 781 1200 0x26
73,
Zev N2WKS
-----Original Message-----
From: Chris Vincent [mailto:w5ctv@cox.net]
Sent: Sunday, January 05, 2003 9:55 PM
To: writelog@contesting.com
Subject: [WriteLog] Rig Control for IC746Pro
I didn't obey the cardinal rule of trying everything out before the
contest and discovered I couldn't get the rig interface to work in
Writelog. I had to set the band manually. Fortunately I didn't have to
change it as I was on for such a short period of time. I am using WL
v10.38 and an IC746Pro. I know the PC to rig interface is working as I
get the freq. info transferring to my everyday logger Prolog 2K. I have
done everything in WL as I had done with my IC706 and that worked fine.
I noticed that the Pro model is not listed, only IC746, but the same
is true with Prolog and that works fine. Does anyone have any suggestions?
Thanks and 73,
Chris
W5CTV
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
CONFIDENTIALITY NOTICE: This communication and any attachments are
confidential, and are only for the use of the intended recipient. If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited. If you have received this
communication in error, please contact the sender immediately and
delete the original message. Thank you.
|