I don't see the problem here. Exactly which button did
you press on the front of your MP in order to get WL
to record the wrong frequency? And were you working
tranceive or split?
I am a bit surprised to see a report of a problem with
this particular rig for two reasons: (a) the driver has
been in operation for several years without such a report
and (b) this happens to be a rig that I have tested myself.
So please report this problem precisely so I can fix it.
Thanks
Wayne, W5XD
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of GW4BLE
> Sent: Sunday, January 19, 2003 17:07
> To: writelog@contesting.com
> Subject: [WriteLog] Frequency Logging - WL & FT1000MP
>
>
> Hi,
>
> This is something that has been happening for some time, but
> have only just
> got round to querying it with the group....
>
> If I "run" with VFO "A" on my FT1000MP Writelog records the frequency
> correctly (say, for example 14200); however if I chose to S &
> P on VFO "B"
> and then work someone under that VFO Writelog logs the
> frequency of VFO "A".
>
> This is of course wrong, as the contact was made on a
> different frequency,
> i.e. that of VFO "B"" .
>
> Has anyone else noticed this? Is it a Writelog problem, or
> a FT1000MP
> issue?
> I am using the latest release of Writelog, but this was also
> apparent under
> an earlier version.
>
> Please post any replies direct to the reflector.
>
> Thanks.
>
> 73
>
> Steve
> GW4BLE
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|