Ah, the plot thickens. So W9OL has the F5U003 that didn't work, but we did
have a F5U103 a couple of years ago that didn't work correctly with FSK for
WA0SXV and myself. Keith, did it work correctly for you?
Regardless, what's the difference between the F5U003 and F5U103?? Maybe 003
and older 103s didn't work so well, but later 103s do?? ;-)
----- Original Message -----
From: "Keith Regli" <keith@kregli.com>
To: <writelog@contesting.com>
Sent: Saturday, January 25, 2003 4:48 PM
Subject: RE: [WriteLog] Belkin testing
>
> I pulled out the ones we were fiddling with. On the outside the only
> numbers they have ar F5U103 and P80515. Inside the I found boards of
> different revs. F5U103M REV B screened on one REV C on another. The
> chip has a sticker with F5U103M U3 Rev 2.04 and Rev 2.05 on another.
> I'm not sure of the rev on the drivers - I'd have to do more digging.
>
> BTW - 4 screws.
>
> Keith Regli (K7KAR)
> mailto:keith@kregli.com
> http://www.kregli.com
>
> -----Original Message-----
> Don, Bill, W9OL, mentioned having the "old one". Is the one that you're
> testing different than the one that Mike, Keith, and I tested about 2
> yrs ago? I suppose you don't know if you didn't try one back then, but
> I just wondered what might have changed and/or how to tell? I remember
> trying all the MMTTY USB parameters when I tried the one we exchanged
> around 2 years ago, and nothing worked. Is the F5U103 a new number??
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
|