WriteLog
[Top] [All Lists]

[WriteLog] Hooking Isolation Transformer?

To: <writelog@contesting.com>
Subject: [WriteLog] Hooking Isolation Transformer?
From: garry@ni6t.com (Garry Shapiro)
Date: Mon Feb 3 02:27:10 2003
Stan:

Sounds like your hum was differential mode--i.e.on the audio--and the
low-end rolloff of the isolation transformers took it out. What I am
experiencing appears to be due to the transformers themselves by magnetic
coupling.

Garry, NI6T

> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]On Behalf Of Stan Staten
> Sent: Sunday, February 02, 2003 14:41
> To: 'Wayne Alexander'; writelog@contesting.com
> Subject: RE: [WriteLog] Hooking Isolation Transformer?
>
>
> I used two Radio Shack audio isolation transformers in a small
> project box that I inserted in the middle of a standard stereo
> patch cable.  Got rid of the hum that I saw on the RTTY screen.
> I had seen a spike every 180 cycles.  Now the display is clean.
>
> 73 Stan, N3HS
>
>
>

<Prev in Thread] Current Thread [Next in Thread>