Yepp, had the same this morning. Retraining....
Check help file about the letter "N" in setup and also for
the Cut-Numbers in the INI-file. This will do.
Bengt / SM6E
----- Original Message -----
From: "Garry Shapiro" <garry@ni6t.com>
To: "Writelog reflector" <writelog@contesting.com>
Sent: Friday, May 23, 2003 9:01 AM
Subject: [WriteLog] cut numbers
> The Help file, under "CW and RTTY and Voice Memory Setup" says:
>
> digit n (in the range 1 through 5)
> the current QSO number is substituted for the % when that message is sent.
> The number sent will be preceded by enough "T" characters in Morse (or "0"
> digits in RTTY) to ensure that at least n characters are sent in the number.
> For example, if the sequence number is one, and there is a "%3" in the F3
> field, then pressing F3 will send "TT1". This is for contests that require a
> "three digit serial number".
>
> Mine is sending 00x, not TTx. How can I instruct WL to send selected cut
> numbers A,T and/or N but not ALL of them? (Sorry, I need to be retrained for
> each major contest!)
>
> Garry, NI6T
>
>
>
> __________________________________
> 160 meters---not a band but an obsession
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|