WriteLog
[Top] [All Lists]

[WriteLog] more getting started questions

To: <writelog@contesting.com>
Subject: [WriteLog] more getting started questions
From: dl6jz@t-online.de (dl6jz@t-online.de)
Date: Wed Jul 30 02:59:48 2003
Hi Tad,

that's exactly the right way!

I am using the same configuration with my FT-1000MP and the notebook:

- FSK, CW, PTT through a homemade interface to the one COM-port

- rig control via USB-RS232-converter.

73 + 55
Wolf, DL6JZ

tad danley wrote:
> Thanks everyone for the feedback so far, it has been a
> great help!  Just 
> a few more questions on com ports before I dive in:
> 
> My Dell has _one_ DB-9 serial port and several USB ports.
>  I would 
> prefer to run FSK RTTY with the IC-756 ProII and it
> sounds like my best 
> bet is to use this serial port to connect to ACC1 of the
> 756 for RTTY. 
> Can I run the CT-17 to one of the USB ports through a
> USB/RS-232 
> cable/adapter and use this for rig control?
> 
> Thanks in advance and 73,
> 
> -- 
> Tad Danley, K3TD
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
<Prev in Thread] Current Thread [Next in Thread>