As I recall, in RTTY there is a conversion from LTRS to FIGS as needed. But
although I have been doing RTTY for 35 years, I am a
complete novice at RTTY contesting with WL. So I am not a good source on that
point.
No need to have cut numbers defined in WriteLog.INI to use the conversion
for received numbers. The cut number list in the .INI
file only controls transmissions.
-- Eric K3NA
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Doug Faunt N6TQS
+1-510-655-8604
Sent: 2003 November 10 Monday 14:47
To: eric@k3na.org
Cc: kk6t@pacbell.net; writelog@contesting.com
Subject: Re: [WriteLog] Serial number in letters
Is that only for CW "cut" numbers, or does it also work for RTTY where
100 would be QPP?
And for cut numbers, is it dependent on having the cuts defined in
Writelog.ini?
The more I do with WL, the more I find it'll do.
73, doug
Date: Mon, 10 Nov 2003 14:40:27 -0500
From: Eric Scace K3NA <eric@k3na.org>
Just type in the letters into any field which is tagged as
"numeric" in the exchange parameter setup. WL will convert the cut
numbers to digit; i.e., ATT becomes 100.
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Terry Dunlap
Sent: 2003 November 10 Monday 12:41
To: writelog@contesting.com
Subject: [WriteLog] Serial number in letters
I forget....how do you convert a serial number received in letters
to numbers? Also, how do you have Writelog do it automatically?
73 de Terry KK6T
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|