Doc,
You may have WL set up for QSK. In WriteLog go to Setup / Ports and in the
lower right hand corner look at CW PTT. Select either Com or LPT control
as appropriate for your PTT connection.
73, George .. W1ZT
At 02:50 PM 11/22/2003, arholub wrote:
Have: WriteLog 10.42C
Yaesu 920
Henry non-qsk 2KD-5 amplifier
Dell P-III, WinXP home
Problem: When my Yaesu 920 manually keys the amplifier, the amplifier's
antenna relay remains closed during the keying, as it should.
When I key the Yaesu 920 with WriteLog 10.42C, the amplifier's antenna
relay follows the keying, as is SHOULDN'T. This will burn out the antenna
relay in the amplifier.
Is there a setting in WriteLog that I should modify? I have tried various
settings in the Yaesu 920 but they have no effect on the WriteLog keying.
Help
Doc
WA6OGO
Visit our web site, www.arholub.com, to get the latest news, computer
class information and Orange Coast College marine course information.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|