On Mon, 1 Dec 2003 14:42:56 -0800 (PST), John/KA9F
<baldwin78@sbcglobal.net> wrote:
>Where in the ini files do you find autosave?
>I've notice also after about 50 qsos in cw I get 1 erratic reaction then fine
>fer a while? John Ka9f
_________________________________________________________
It goes under the [Configuration] heading, although you may have to
create the entry yourself. It should look like this:
AutoSaveCount=n
Where n is a number indicating how often the save takes place. If
n=1, WriteLog will save after every contact. If n=2 it will save
after every second contact and so on.
There are a couple of considerations in choosing the number. When
your contact count gets up in the hundreds or thousands, the save
takes a significant amount of time, so you probably don't want to set
it to 1. I have mine set to a relatively large number and *try* to
remember to do a manual save when things get slow. The risk here is
that a power failure might cause you to lose your unsaved data. You
have to balance the risks.
--
Bill, W6WRT
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|