A month or so back I reported trying MMTTY in FSK mode with Writelog and having
problems with the receive audio level after a transmission either being over
driven or extremely low. In either case decoding was impossible until I'd
slide the volume control up or down. I had the same problem when trying RTTY
Write in FSK mode, it was a head scratcher as this had never happened in AFSK
mode with either MMTTY or RTTY Write.
After playing with a lot of things and not resolving the problem I was at the
point of trying a different sound card. But then just for grins I renamed my
Writelog INI file and did a reinstall of 10.44 (full version). With the new
install and resulting new INI file, the problem is resolved! I spent around 14
hours testing it in RTTY RU without one sign of a problem.
Why this resolved the problem of the the receive audio level changing after a
transmission, I do not know. But, since it is now working OK I don't really
care why it is fixed.
73 Larry L
W0ETC
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|