Don,
Generally speaking, you need to use an external switching device to move the CW
keying from one radio to another.
Since you can only transmit on one radio at a time, this logic is appropriate.
There are several devices commercially available (W5XD, TopTen, ZS4TX, etc.) or
you can homebrew one.
73,
N5NJ
> ------------Original Message------------
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: "WriteLog Reflector" <WriteLog@contesting.com>
> Date: Sat, Jan-10-2004 9:23 AM
> Subject: [WriteLog] Need help on SO2R CW on 2 COM ports
>
> I'm trying to run SO2R CW on one PC, keying CW from two separate COM ports.
>
> I have one COM port keying CW on one radio and a separate COM port keying CW
> on
> the 2nd radio. They work separately if I select the COM port in Setup-Ports.
>
> However, I'm only able to choose one CW COM port in Setup-Ports. I've glanced
> through WriteLog help and the K9JY site but can't find how to control one CW
> COM
> port for one radio and another CW COM port for another radio.
>
> Thanks,
> Don AA5AU
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|