Re: [WriteLog] FT1000D and writelog to top ten band decoder

[Jerry Flanders <jeflanders@comcast.net>]

The following works for me to output the band data signals under Win98se: 
In Writelog,

"Setup" - "ports". Check the correct port under the "Antenna Relay" column.

I think an additional program may be needed under XP to get the port 
working(?).

Jerry W4UK

At 21:51 2/1/04, Ukbrown@aol.com wrote:
> I am trying to set up a Top ten band decoder to work with a ICE 419A filter
> in automatic position. I have connected a printer cable from the LPT1 to 
> the J1
> on the band decoder box but with the writelog program running I cant get the
> becoder to work in Auto mode. Has anyone had experience setting this up. I
> went to the setup mode and set up the LPT 1 port but no luck. Any help is
> appreciated. PTL bill brown K0UK..You can reply directly to my email address
> ukbrown@aol.com....


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/