WriteLog
[Top] [All Lists]

Re: [WriteLog]AR Telnet with WL

To: writelog@contesting.com
Subject: Re: [WriteLog]AR Telnet with WL
From: "k0bx@qsl.net" <k0bx@yahoo.com>
Reply-to: k0bx@qsl.net
Date: Wed, 25 Feb 2004 08:48:41 -0800 (PST)
List-post: <mailto:writelog@contesting.com>
Yesterday I wrote that AR and WL was not
communicating.  
Today I have great news, All I had to do was to Check
"Configuration>Ports>LocalNetwork>Telnet".  It worked
very well and is a very nice interface.  I still have
to figure out how to use it.  But will be nice to get
the CW/RTTY spots only in WL

Joe K0BX

> 
--- "k0bx@qsl.net" <k0bx@yahoo.com> wrote:
> I want to thank all that responsed to my question
> concerning AR with Writelog.  
> 
> I have not got it to work yet.  But since AR is
> working in a stand alone mode, and Writelog Telnet
> is
> working fine, then I would assume that the problem
> is
> in the setup.  So I am at work this morning and went
> to the VE7CC website and "RTM" (Read the manual).  
> 
> I think my problem is that in the configuration, the
> communications menu, that I do not have anything
> 'Checked" in the Local Network.  I think that I need
> to have 'Telnet' checked.
> 
>     * AR User - Check "Configuration>Ports>Local
> Network>Telnet".
>     * Logging Program - Telnet to 127.0.0.1:7300 if
> in
> same machine.
>     * Logging Program - Telnet to IP address (port
> 7300)if in different machine (ie 198.162.100.1
> :7300) 
> 
> I will report if this is the fix after I get home
> tonight and try it.
> 
> Sorry for the bandwidth, but maybe this will help
> someone else too.
> 
> Joe K0BX
> 25 years in Information Systems and still can't read
> the manual!


__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>