Also, I had no problems, at least that I can remember or of a nature that
wasn't fixed quickly and easily.
There's a dim haze that I remember having to make sure the set up
configuration in WriteLog was correct.
Also, make sure the transmit is in auto on the DXDouble box. Frequently,
about every CW contest it takes me a while to figure out why nothing is
happening and it usually because I have switched to DXDouble to manual
transmit.
But, I have slept since then as well.
Chuck, KE4OAR
----- Original Message -----
From: "Lee" <lee@firstinter.net>
To: <writelog@contesting.com>
Sent: Monday, March 01, 2004 11:29 PM
Subject: [WriteLog] DX Doubler and WriteLog
> Has anyone had success using WriteLog with the Top Ten DX Doubler (DXD)?
> I have the unit and cannot get it to properly key on CW. My LPT port
> can key the FT-1000MP using WriteLog with a direct connection to the key
> jack, but with the DXD in line the best I can do is key the PTT with no
> CW note or output. I do no better using WinCT. The DXD unit has been
> tested and it is working properly. My 25 pin computer cable has been
> replaced and it is not the problem. I am guessing it has to do with the
> config file, but have not yet found a winning combination. I am running
> Windows XP Home on a P4 computer and have done the LPT port
> modification.
>
> Any suggestions or sample config files used with DXD will be
> appreciated.
>
> 73,
>
> Lee, KY7M
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|