The same thing happens with the 850 and 950. It goes into split
properly on the 940, however. It appears that there is a slight
difference in the command protocol between the older 940 and the later
models.
Mike, W1NR
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Jamie Dupree
Sent: Thursday, March 25, 2004 5:35 PM
To: writelog@contesting.com
Subject: [WriteLog] TS-2000 & Split Function
Writeloggers -
I recently bought a TS-2000 and am still figuring it out, etc.,
as I managed to get it to talk to my PC and Writelog without
much of a hassle.
My query is this - when I set a split frequency using the [-] key,
the split frequency on VFO B is set properly - but the radio
does not actually go into split mode. I have to hit the button
myself - no big deal, but it would be nice to just go immediately
into split operation when need be.
Any ideas on how I can get that to happen? I really didn't
see anything in the help file, but I did see a message from
a few days ago about 'forcing' a split with an Icom rig.
Thanks for the help.
Jamie NS3T
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|