I thought I would check out my 706MkIIG too. Same thing. However, it does
work by selecting Omni VI and setting the Icom address to 04H. Probably will
work with other rig selections too.
I also checked out the 706 on N1MM and found it expects the 706 to be set to
58H. Seems everyone wants a different address! However, it worked fine once I
had the Icom set on the correct address.
73,
Alan N5NA
> Having a similar problem here. No USB to Serial converter involved. Using
> a Rigblaster Plus and the IC-17 Level Converter. Dxbase 2003 can
> communicate with the 706MKII and vice versa, but no communication between
> Writelog (10.48F) and the 706MKII. My 756Pro, currently off the bench
> and into Icom for service, communicates with Writelog just fine using
> default CI-V values.
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|