I see a similar behavior on the Omni VI+ with a serial interface. I always
thought it was a timing issue between clicking on the bandmap and polling
the rig frequency info.
Keith Regli (K7KAR)
mailto:keith@kregli.com
http://www.kregli.com
-----Original Message-----
I also run an Icom IC-775DSP and IC-PW1 and have experienced this same exact
problem from the beginning.
...
73, Don AA5AU
-----Original Message-----
This is the first time I have had a problem with this and looking for some
advice. I use Writelog (Latest version) with an IC-775DSP and a PW-1. What
I experienced all weekend in WW was when I clicked on a spot I had to do
multiple clicks before it would put the spot in the entry window and change
the frequency on the radio. What I noticed on the band map was that the
frequency would change immediately and then just as fast go back to the
original frequency. I would have to click many times to get this to work.
I then tried it with the
PW-1 off and that seemed to fix the problem. Frequency changes were
immediate.
So, have I a bad CT-17? I don't think so. I changed the ports around and
it made no difference. Any ideas, help, or incouragement would be
appreciated.
Note-this had worked before in multi-band contests and this weekend I was
single band.
Dick W7ZR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|