Rip, should LPTX not be LPT1? Also, do you have a printer driver aimed at
the same port. I found this on another machine and when I removed the
printer driver the LPT worked. Chris G3SJJ
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Rip Smith K3XO
Sent: 29 January 2005 16:03
To: writelog@contesting.com
Subject: [WriteLog] Parallel Port CW
I have reached the end of my resources in trying to get Writelog to key
my radio through the parallel port.
I've had no problem getting parallel port keying to work with DXBase and
the N3FJP software, and I am able to control the Icom 746 with Writelog
and the other programs over the serial port.
I downloaded the file dlportio.zip, and followed the procedure outlined
for it.
I extracted it and copied the files dlportio.sys and dlportio.dll to the
\install folder, and then ran the install.exe program.
All seemed to go OK and I rebooted.
Then, I opened the writelog.ini file to edit it as described in the
documentation. There was no LPTX= line so I added one and made it
"LPTX=0378" which is the starting address for my printer port #1. I also
added the line "CW_ON_PIN1=1" as described in the instructions.
After all of that, when I go back into Writelog, I still do not have
access to the printer port in the port setup screen.
What have I missed?
Rip K3XO
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.1 - Release Date: 27-01-05
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.1 - Release Date: 27-01-05
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|