WriteLog
[Top] [All Lists]

Re: [WriteLog] RC2800PX interface?

To: "Len Morris VE3FJB" <lmorris@rock95.com>
Subject: Re: [WriteLog] RC2800PX interface?
From: DJ5JK@t-online.de (Juergen Krumm)
Date: 08 Feb 2005 08:29 GMT
List-post: <mailto:writelog@contesting.com>

"Len Morris VE3FJB" <lmorris@rock95.com> wrote:
> Hi guys, I seem to be stuck on this one. I have a RC2800PX rotator on Com 3, 
> it works with Hyperterm. I have set it up under ports as Com 3 and as both 
> RC2800PX or RC2800. Under Radios the Move to heading xxx is not grayed out,
> but when I select it, the rotator does not move.. Is there something else I
> am missing? Also I believe I saw somewhere (and of course can't find it now)
> there is a keyboard short cut to move the rotator..
> Any help would be appreciated..
> 
> 73
> Len VE3FJB

Hi Len & group,

exactly the same situation here: RC2800PX rotator works fine with Hyperterm 
and Swisslog, but no way to go with Writelog.
In an update note in Dec. 2004 (see below) Ron, K5DJ mentioned some fixes
including RC2800PX rotator control. Unfortunately the problem is still there
and we are still waiting for a fix.

73 de Joe, DJ5JK


---Original Message---
From: "Ron k5dj" <k5dj@austin.rr.com>
To: <writelog@contesting.com>
Subject: [WriteLog] Update 10.51M ready to download..

 New and Fixed in version: 10.51M

 WAQP update
 Makrothen contest update
 Fix to W9XT card record from SHIFT+Fn
 MDCQP update (BCT to BCO)
 ARCI module update for 6 digit ARCI numbers in Cabrillo  
 Add SCQP module  Fix TCP/IP networking reliability problem 
 %Fn key handles n greater than 9, and also, on an empty 
 field, lookup its value as the F key is pressed.
 Fix failure to handle MK-1100 PTT properly on SSB transmission 
 after pressing the CW paddles and before sending a CW Fkey message. 
 RC2800PX rotator control
 Preset exchange has priority over calculated fields even when the 
 CALL determines the multiplier. 
 When opening a file from the startup screen, the time off calculation 
 wasn't restarting properly. Now it does.  
 Support K1EL Winkey. Two INI entries added.  
 Support D80 setting in LZDX contest 
 Fix TCP/IP networking reliability problem (also posted as
 wlnet1050Patch.zip) 

  http://www.writelog.com/Downloads/wl1051mUPG.ZIP

 
 73, de Ron K5DJ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>