WriteLog
[Top] [All Lists]

Re: [WriteLog] sound card ini setting

To: <writelog@contesting.com>
Subject: Re: [WriteLog] sound card ini setting
From: "David Hachadorian" <k6ll@adelphia.net>
Date: Sun, 10 Apr 2005 08:18:43 -0700
List-post: <mailto:writelog@contesting.com>
----- Original Message ----- 
From: "Rsauvan" <cabmas@chorus.net>
To: <writelog@contesting.com>
Sent: Saturday, April 09, 2005 10:18 PM
Subject: [WriteLog] sound card ini setting


> Do I need to enter another ini setting in writelog to get
> it to see the second sound card with my second radio.
> Im trying to set my rigs up to run MMTTY like WA9ALS
> has explained in a website I saw. Im thinking I need to
> enter WaveOutIndex=0 and also another WaveOut Index=1
> for the second card etc?? Is that correct?
> Thanks-Bob-WT9Q

I don't think so. Go to mmtty/options/setup/misc, and try different
choices for the "device" selection until you hit the right one for
your second sound card. It's usually 1, 0, or -1. Since you are using
two soundcards, and mmtty remembers only one setting, You will have to
make this selection every time you start mmtty, so write down the
correct device number for both of your sound cards. It helps to have a
checklist like the one I posted yesterday. This procedure works for 
FSK transmission, but I don't know if you need to fiddle with anything 
else for AFSK.

Dave Hachadorian, K6LL
Yuma, AZ

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>