George,
Do you have the Pro III and Writelog set to the same Address? I had to set
my Pro II to the
address for a Pro I in order for Writelog to select it. I see in Version
10.55D that there is no
Pro III yet. So set your radio to the Pro II Address 64 hex.
Jerry, W6IHG
At 11:36 PM 10/19/2005 -0400, George Allen (Allen Tunnell Corporation) wrote:
>I have just switched to WriteLog for my logging program. Prior to the
>switch, I was using YPLOG. YPLOG still communicates correctly with my ICOM
>756ProIII.
>
>I set up com port 1 in WriteLog and set the baud rate to 19,200, the speed
>at which the radio is set; but, cannot communicate with the Icom radio. (I
>also tried "auto".)
>
>I feel that I have missed a setting somewhere since I cam unable to
>communicate with the radio.
>
>I searched the archives; but, found nothing to help me with this
>problem. Please excuse if this is a commonly discussed issue....I just
>don't know the answer.
>
>Any suggestions?
>
>Thanks
>
>George
>K2CM
>Apalachin, NY
>
>
>--
>No virus found in this outgoing message.
>Checked by AVG Anti-Virus.
>Version: 7.0.344 / Virus Database: 267.12.4/142 - Release Date: 10/18/2005
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|