Hi!
I have this problem as I described in a previous mail.
But my comport drop out directly when the program starts , It reads the
setting of the rig once but then if I change freq on the rig nothing happens
in the program..
Do you guys who runs PRO3 use POR2 in the port setup ?
Or is it possible to change CI-V adress in writelog.ini file ?
Lars SM3KOR / 7S3W
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Ted Huf W4ZE
Sent: Sunday, January 15, 2006 2:05 AM
To: 'WriteLog Reflector'
Subject: [WriteLog] Com Port Drop Out
Using WL 10.57H in NAQP with IC756PRO3 and microKeyer. Started having the
com port to the radio drop out. The bandmap does not move nor the button
where you set the frequency. Checking the microKeyer control panel I can
see that it is working. Nothing I can do with in the program like go to
setup/ports and hit ok works like it used to. The only way to get it back
is to end the WL and restart it. Anyone else having this problem?
I had this problem a couple of versions ago, but it seems to be back now.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|