Works fine on my Pro3 Ted. But I've decided not to rely on it, since RF can
affect the CIV units, and leave the rig stuck in transmit.
Charlie
KI5XP
> -----Original Message-----
> Date: Mon, 6 Mar 2006 07:52:43 -0800 (PST)
> From: Ted Huf <ted@w4ze.com>
> Subject: [WriteLog] IC-756 Pro III Comm PTT
> To: writelog@contesting.com
> Message-ID: <20060306155243.30871.qmail@web30910.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Does any know if the Writelog will send PTT commands
> to the IC-756 Pro 1/2/3 on the control port? In the
> manual of my Pro 3 I find the following description
> for command 1C00 and 1C01: (Set the transceiver to
> receive or transmit condition (0=Rx; 1=Tx). Can Comm
> PTT be set to YES on the ports setup and will Writelog
> us it?
>
> Ted Huf W4ZE
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|