I'm still using 98SE because of all the XP and 2000 posts of problems
with
WL cw. I get choppy cw also as well as choppy DVK. It is better if I shut
down AVG but not perfect like it used to be. It helps if I reboot every few
hours but then the problem gradually reappears. This problem was not always
be there. I forget which version of WL it started with.
73 Phil N0KE
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Jim Johnson
Sent: Sunday, April 09, 2006 2:44 PM
To: writelog@contesting.com
Subject: Re: [WriteLog] Window XP and LPT CW
Hey David/K6LL and Bill/AK0A (and the rest of the group)
This solve my problem with the LPT keying the transmitter.
Now the CW is very choppy. I have shutdown all the unused
programs, ie AVG, BOClean, Internet connection... the problems
appears to continue.
I am using a wireless mouse, could that be the problem????
Any ideas ???
Thanks
Jim/KC4HW
http://www/AlabamaQSOParty.org
Apr 29th, 2006
On 9 Apr 2006 at 16:52, David Hachadorian wrote:
>
> ----- Original Message -----
> From: "Jim Johnson" <jimjohnson@allvantage.com>
> To: <writelog@contesting.com>
> Sent: Sunday, April 09, 2006 4:30 PM
> Subject: [WriteLog] Window XP and LPT CW
>
>
> > Need a little help with the configuration...
> >
> > Writelog Version 10.57H
> >
> > Have Direct-IO version 4.4.271
> > Using this example contained in I have identified and
> > include ports
> > 378, 278 and 3BC
> >
> > I found the WriteLog.ini in the WINDOWS directory but
> > could not
> > see where to put the setup for LPTs
> >
> > LPT ports in WL.ini: LPT1=0x378, LPT2=0x0, LPT3=0x0
> >
> > In WriteLog Setup Port the areas for selecting the LPT for
> > CW
> > keeying is grayed out....
>
>
> Try this method from k2qmf. It worked for me.
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
> --------------------------------
> Hello All,
>
> I have spent many hours trying to get Direct I/O
> to work on my new computer so that I could send CW
> via my LPT port.
> The computer uses Windows XP.
>
> Well I finally figured it out!! I'm sure most already have
> gotten it to work but I'm not very computer literate.
>
> Anyway here is the way to do it:
> 1 - Open the Direct I/O control panel.
> 2 - In the I/O Ports Tab enter the BEGIN and END address.
> For LPT1 it is 378 and 37A.
> 3 - Click ADD button ( This is the step they left out)..
> 4 - Go to the SECURITY Tab
> 5 - Click BROWSE button and locate writelog directory.
> 6 - From there locate writelog\Programs\WriteL32.exe and
> click OPEN
> 7 - Click ADD.
> 8 - Close Control Panel...
>
> That's it!! It works great.... Good Luck.
>
> 73, Ted K2QMF
>
> P.S. - Remember you must do step 3 or forgetaboutit...
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.4.0/305 - Release Date: 4/8/06
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|