----- Original Message -----
From: "ukbrown" <ukbrown@acsol.net>
To: <writelog@contesting.com>
Sent: Sunday, May 14, 2006 7:08 PM
Subject: Re: [WriteLog] K9MI USE Direct I/O
> I'm going to need to start using an lpt port while using
> WriteLog. Just
> curious if users of WriteLog have a favorite between
> direct-io and User
> Port.
>
> Thanks, Mike K9MI
>
> USE DIRECT I/O it really works and is easy to use..trust
> me...not a techie here. PTL bill K0UK
I agree. Use K2QMF's setup procedure:
---------------------------------------
Anyway here is the way to do it:
1 - Open the Direct I/O control panel.
2 - In the I/O Ports Tab enter the BEGIN and END address.
For LPT1 it is 378 and 37A.
3 - Click ADD button ( This is the step they left out)..
4 - Go to the SECURITY Tab
5 - Click BROWSE button and locate writelog directory.
6 - From there locate writelog\Programs\WriteL32.exe and
click OPEN
7 - Click ADD.
8 - Close Control Panel...
That's it!! It works great.... Good Luck.
------------------------------------------
Dave Hachadorian, K6LL
Yuma, AZ
.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|