There is actuall a third choice.
3) Change the CI-V address in WL to that of the PRO or PRO II
This is done with an .ini file entry, such as this cut from my file:
[rigs]
Icom IC-756PRO=0x6e
The advantage of this is that all your other programs
and setting will not be affected
73,
Ric KV1W
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Gary Senesac AL9A
Sent: Saturday, September 02, 2006 4:52 PM
To: writelog@contesting.com
Subject: Re: [WriteLog] Rig Control PROIII
Two choices here Bob:
1. Upgrade your version of WL to one that has the drivers for the PROIII.
2. Change the default CI-V hex address of the PROIII to that of the PROII
so that it communicates with WL as though it were a PROII. I believe the
CI-V address of the PROIII is 6Eh. Go into the setup menu of the rig (on my
IC-756PRO I press the Set/Others options on the menu screen - yours may be
different so check your manual) and scroll down through the menu items until
you find the CI-V Address line. Change the 6Eh setting to 64h which is the
PROII. Reboot WL and it should now communicate with the PROIII since it is
talking to WL like a PROII.
One caution note. If you interface the rig to other software, such as a
logger program, MMTTY, etc. you will either have to change the rig address
back to its default or change the software to the PROII values to get things
working right with those programs. Good luck.
73,
Gary AL9A
----- Original Message -----
From: "Bob Jensen - aa7fk" <aa7fk@hotmail.com>
To: <writelog@contesting.com>
Sent: September 02, 2006 6:17 AM
Subject: [WriteLog] Rig Control PROIII
> Morning,
>
> Need some help with getting Rig Control to work in my old WriteLog version
> 10.52F with my new PROIII.
>
> I formerly had my Icom 761 working just fine in WriteLog using rig
> control,
> using com port 4 and IDing the rig as 761. Everything worked fine.
>
> Bought the new 756PROIII, and though my version only lists the PROII ..
> listing it would not work. So is there something I need to change ? If
> so
> where and how? :-).
>
> I must not be the first to have this problem, so would appreciate help
> (I'm
> not a tech computer savvy guy :-)
>
> And I know the port works cuz my logging program ProLog2k, works just fine
> with the new PROIII and rig control.
>
> THANKS
>
> Bob AA7FK
>
> _________________________________________________________________
> All-in-one security and maintenance for your PC. Get a free 90-day trial!
> http://www.windowsonecare.com/trial.aspx?sc_cid=msn_hotmail
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|