WriteLog
[Top] [All Lists]

Re: [WriteLog] MMTTY Plug in issue

To: "'Mark Perrin'" <mperrin@ordata.com>, <writelog@contesting.com>
Subject: Re: [WriteLog] MMTTY Plug in issue
From: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sun, 22 Oct 2006 22:13:27 -0400
List-post: <mailto:writelog@contesting.com>
Mark, 

Each profile has the line AFC=1.  You will need to edit USERPARA.INI 
for each profile to change AFC=1 to AFC=0 if you do not want to turn 
on AFC when you change profiles.  

Each Profile has its own section in USERPARA.INI starting with 
[Define#] where # is 0 - 7 for the 8 "profile slots."  I'm sure 
the information is in the MMTTY documentation. 

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support@microham.com 
 




> -----Original Message-----
> From: Mark Perrin [mailto:mperrin@ordata.com] 
> Sent: Sunday, October 22, 2006 9:47 PM
> To: Joe Subich, W4TV; writelog@contesting.com
> Subject: Re: [WriteLog] MMTTY Plug in issue
> 
> 
> I tried this Joe, and only works when I go to "regular rtty" 
> from one of the options.  For all others, flutter, flutter FIR, 
> etc, adds a check mark to AFC.
> 
> Any other suggestions?
> 
> 73, Mark N7MQ
> 
> At 08:00 PM 10/21/2006 -0400, Joe Subich, W4TV wrote:
> 
> >It is probably stored in the profile.  Look at USERPARA.INI in
> >the MMTTY directory.  For example, the second line of the
> >STANDARD RTTY profile is AFC=1 ... change it to AFC=0 and
> >AFC will not activate when you recall the standard profile.
> >
> >73,
> >
> >    ... Joe Subich, W4TV
> >        microHAM America
> >        http://www.microHAM-USA.com
> >        http://groups.yahoo.com/group/microHAM
> >        support@microham.com
> >
> >
> >
> > > -----Original Message-----
> > > From: writelog-bounces@contesting.com
> > > [mailto:writelog-bounces@contesting.com] On Behalf Of Mark Perrin
> > > Sent: Saturday, October 21, 2006 4:12 PM
> > > To: writelog@contesting.com
> > > Subject: [WriteLog] MMTTY Plug in issue
> > >
> > >
> > > All,
> > >
> > > I just noticed that everything I click on one of the profiles
> > > in the MMTTY Plug In, that it automatically activates the AFC
> > > option .... any idea where the software is getting instructions
> > > to do that .... vy annoying.
> > >
> > > 73, Mark N7MQ
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web:  http://www.writelog.com/
> 
> 
> 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>