Doug
I just checked my 8 port Edgeport and all is well with the band maps
it just doesn't make sense to me, that the Radio Button has the right
freq and the band maps don't. I thought the same data was used.
Maybe one of the developers can chime in on this
Ric KV1W
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Doug Nelson
Sent: Wednesday, December 27, 2006 19:21
To: writelog@contesting.com
Subject: [WriteLog] Edgeport question....
I'm attempting to use an Edgeport USB to serial adapter. It allows FSK
keying and Rig Control just fine.
The "radio" buttons in the QSO entry window follow band selection and
frequency from the radios and the radios can be commanded from the radio
buttons. However, the band maps do not show frequency. If Rig Control is
connected to the "real" serial ports, everything is fine.
I have setup ports correctly in the WL ports menu as well as correct
COMM ports in the radio button menus.
OS is Windows 2000 on a Pentium III. I looked at the archives and
everyone seems to be having good results with Edgeports. Any thoughts
from the group?
Thanks....Doug...K6HGF
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|