Thank you all for replying and helping us solve the following problem.
The solution is simple, edit writelog.ini file with Notepad and under
[Ports] add the line: Commslot2=8
This way the second port in Setup->Ports menu of Writelog will show Comm8
and this way writelog will use comm 8.
Dennis Drakopoulos
73 de SV1CDN
-----Original Message-----
From: Dennis Drakopoulos [mailto:sv1cdn@hol.gr]
Sent: Thursday, March 01, 2007 4:21 PM
To: 'writelog@contesting.com'
Subject: RS232 CW PTT problem
Importance: High
Hello to all!
A Greek friend of mine is using writelog v10 and recently upgraded his
computer. The new computer has only one RS23 port to which he has connected
the control box of TS850 rig. He had made a simple PTT trnasistor circuit
for CW PTT using RTS pin of a second RS232 port in the old computer. There
was no other serial port in the new computer so he bought a PCI to serial
card and this gave him two more serial ports COM7 and COM8, which work
properly.
The problem is that Writelog v10 doesn't see any RS232 port except COM1,
COM2, COM3, COM4 so there is no way to use his CW PTT circuit... Working
with LPT port is out of the question because it is occupied with printers.
Is there a way to overcome his problem? What would you suggest?
Thank you!
Dennis Drakopoulos
73 de SV1CDN
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|